Manual L-sealers are technological upgrading of chamber machines and enable higher packaging speeds. These machines enable classical film sealing and shrinking as well as only seal products without shrinking the film (e.g. for paper products).
With model KKT-450/600 sealing bar has to be held down manually throughout the entire cycle of sealing (sound signal indicates end of sealing cycle), product than has to be pushed on the transport conveyor that takes it to the shrink tunnel.
With models KKP-450 and KKP-650 sealing bar only has to be pressed down. Electro-magnet holders then keep it pressed down until sealing is performed. Product is next automatically transferred forward.
|Model name||KKT - 450 / 600||KKP - 450||KKP - 650|
|Power supply||V - Hz||3 × 400 - 50||230 - 50||230 - 50|
|Product max. height||mm||200||200||250|
|Sealing bar dimensions||mm||450 x 600||450 x 500||650 x 800|
|Speed of Conveyors||m/min||2…8||2…8||2…8|
|Working board height||mm||810||810||810|
|Film reel max. size||mm||550 x ø250||500 x ø250||700 x ø250|
|Machine size (L x W x H)||mm||2500 x 800 x 1400||1500 x 1100 x 1750||1800 x 1100 x 1750|
|Machine net weight||kg||305||110||185|